Your Cart
Use Code Today on all products Shop now

Stirling Engine Model

What is Stirling engine 

A Stirling engine uses air or gas to create energy by compressing and expanding it at different temperatures."

To be more precise, the Stirling engine is a permanently gaseous closed-cycle regenerative heat engine. In this case, "closed-cycle" means the working fluid stays inside the system. "Regenerative" refers to using a special internal temperature exchanger called a regenerator. What sets a Stirling engine apart from other closed-cycle heat engines is the presence of a regenerator.

People used steam engines in many real-world applications in the early nineteenth century. They were still flawed, though, in a lot of ways.

Boilers were one issue in particular; they had a propensity to blow up, injuring and killing people. Scottish pastor Reverend Dr. Robert Stirling was worried about the number of people killed by boiler explosions. In 1816, Stirling applied for a patent for a safer engine. He based his design on the groundbreaking work of George Cayley, who was a prominent figure in aeronautics.

Of all thermal engines, the Stirling engine has the highest theoretical efficiency. Additionally, the machine is fundamental. In contrast to other engine types, the absence of valves dramatically simplifies the mechanical design.

Principles of a Stirling Engine

A Stirling engine, similar to other engines, has two areas that control temperature. In these areas, work is done by moving the fluid inside the engine." The power piston is located in the blue-colored cold zone on the right in the animation. The displacer piston is in the hot zone, indicated in red.

When more heat is introduced to the hot zone, the gas expands and pushes the power piston, creating work.

The displacer moves left, transferring gas from hot to cold zone as power piston finishes its stroke. The power piston shifts to the left as the gas cools and shrinks. The cycle then starts over.

There are two basic configurations of a Stirling engine. The alpha type is shown on the left. The beta type was discussed earlier. The working principle is the same.

The alpha engine moves gas between its two power piston cylinders, which connect at the same position in the crankshaft. Situated between the hot and cold zones, the regenerator functions as a heat exchanger and is a fundamental element of the 1816 invention.

Thermal efficiency is raised by the regenerator's retention of heat that would otherwise be lost to the surroundings. Several design versions employ the Stirling cycle, including:

  • the rotary displacer type,
  • the low-temperature differential or LTD,
  • the fluid engine,
  • the thermoacoustic engine,
  • the marble engine,
  • multiple piston engines.

Waiting for Material Science to Catch Up

With the help of his engineer brother James, Stirling improved the design. They built and marketed their engines as a steam engine substitute.

However, high temperatures are required for the Stirling engine to function at its peak efficiency and power output. There were many failures in the early years because the materials were not up to the task. The steam engine improved and grew safer during the same period.

Additionally, stirlings were significantly more significant than a steam engine with the same power. As a result, they lost ground to rivals like steam and the recently developed internal combustion engine.

Stirling engines had limited uses for low-power applications, such as providing air supply for church organs, pumping water, and operating ventilators. However, the electric motor finally replaced the technology in even these applications.

Many engine difficulties were resolved when steel was developed, but it was too late. In 1876, Stirling said that Bessemer's genius and time have helped to fix these imperfections.

It is likely that the air engine would have been successful. This would have been the case if Bessemer iron or steel was available 35 or 40 years ago. In the future, skilled and motivated mechanics will need to replicate it perfectly under the right conditions.

Stirling Engine Electric Generator and Cryocooler

Thanks to the Phillips Research Laboratory in Eindhoven, engine development continued until the mid-1930s. Phillips wanted a tiny, silent, thermally driven electric generator for outlying areas to increase sales of its tube radios. While they successfully produced a 200-watt Stirling engine generator in 1951, the device's cost could have been more competitive.

Transistor radios had only been introduced by then. They required very little power; thus, batteries could power them, negating the need for the Stirling generator.

On the other hand, Phillips' research yielded a plethora of new information for the Stirling engine's continued development. They created a cryocooler concurrently, the only Stirling engine application that has succeeded commercially.

When the shaft undergoes mechanical work, the engine operates in reverse and generates a temperature differential. It can reach -200 C, a temperature low enough to melt air.

Stirling in Automotive

The Stirling engine was being developed for use in automobiles. Modern car engines have a 20–25% thermal efficiency range, while the MOD II project created an engine with a 38.5% thermal efficiency in 1986.

When tested in a Chevrolet Celebrity notchback, the engine's urban fuel economy was raised from 26 to 33 mpg. The startup time of about thirty seconds was one drawback. Ford, however, created a version that could start the engine in seconds thanks to internal heaters. The development of an automobile, Stirling, was stopped because of funding cuts and a lack of interest from automakers.

Finding Its Niche

The Stirling engine finds usage in a few additional specialized applications in addition to cryocoolers. An alternating magnetic field drives the piston, creating a temperature differential in the free-piston Stirling engine (FPSE). The unit can be fully sealed because the magnetic drive eliminates the need for gaskets and seals. NASA uses it to cool satellite instrumentation because of its outstanding reliability.

Desalination systems, like Dean Kamen's invention, the Slingshot, which employs water vapor distillation to purify water, are examples of potential future applications. Any fuel can power its Stirling engine. Stirling engines are being tested in solar power by electric generators focused on parabolic mirrors. The efficiency is higher with this configuration than it is with non-concentrated photovoltaics.

Some suggest replacing steam turbines in nuclear power plants to eliminate the need for water in the system. A Stirling engine uses nuclear fuel to generate heat and can operate for long periods of time during space exploration.

A fascinating concept for residential use has gained traction in recent years: micro-combined heat and power, a technology that allows individual dwellings to produce heat and electricity from the same energy source. This fossil fuel-powered generator is engine-driven and linked to the grid. Using a heat exchanger generates electricity and uses waste heat to heat water.

We have good news for anyone interested in experimenting with Stirling engines: they are among the easiest to construct. It's still being determined if the Stirling will continue to be used in specialized applications or will ever play a significant part in the engine industry after 200 years. Without a doubt, we aim for the first.

What are the Uses for Stirling engines?

1, Cogeneration (CHP)- A Stirling engine in a cogeneration unit can use waste heat resulting from the second law of thermodynamics. This waste heat can power the Stirling engine for industrial or agricultural activities.

2, Solar energy generation- Stirling engines, as shown in the figure below, can convert sun power into electricity more efficiently than some photovoltaic cells when placed at the primary of a parabolic mirror.

3, Submarines- Submarines with Stirling engines have a significantly longer submersion time than regular submarines. The first submarine to use Stirling engines was built by the Swedish shipbuilder Kockums. These engines allow a submarine to submerge for more extended periods—days or even weeks—without having to surface to replenish its batteries.

Nuclear power plants: Stirling engines can replace steam turbines in nuclear reactors, improving plant efficiency and lowering the amount of radioactive byproducts. These would eliminate the need for water at any point in the cycle and replace it with liquid sodium as a coolant.

4, Educational demonstration- a slight temperature variation A stirling engine can operate at any low-temperature differential, such as the one between a hand's palm and palm, as shown in Figure 4. (A Low-Temperature Difference (LTD) Stirling engine may produce around 1 W of power directly from a person's palm.)

What are the different types of Stirling engine model?

Their working space shows that stirling engines can be divided into alpha, beta, and gamma.

What is the Alpha Stirling engine?

Two power pistons—one hot and one cold—are housed in separate cylinders in an alpha Stirling.

How does a Stirling engine work?

A thermodynamically "closed" regenerative cycle powers the Stirling engine. It operates at various temperature levels using the working fluid's cyclical expansion and compression.

A gas goes through a compression and expansion cycle known as the Stirling cycle. It functions by causing a gas to expand and compress. Using two temperature settings, thermal energy is netly converted into mechanical work.

The Stirling engine is conventionally categorized as an external combustion engine, just like the steam engine. The engine wall facilitates all heat transfers with the working gas. In contrast to internal combustion engines, it gets its heat from an external source.

In contrast to a steam engine, the Stirling engine shuts off a specific volume of fluid in a permanently gaseous condition, like air. On the other hand, the working fluid in a steam engine changes phases from liquid to gas.

The displacer cylinder is where the pressure variation happens. In the cold zone is the displacer. The flywheel and crankshaft are rotated by the heat generated at this moment. This is how heat energy creates mechanical energy.

The Carnot cycle's efficiency severely limits the process's overall efficiency. The Carnot cycle states that the temperature differential between the hot and cold tanks determines efficiency.

Model: 10277
ENJOMOR Stirling Engine Powered Tricycle Model Running Trike Rider ToyFeatures:.Unique Car Shape: This Stirling engine boasts a highly creative design concept, transforming the model into a toy car that can be started, adding an extra layer of interest and excitement..Science Educational Toys: As an..
$79.99 $79.99
Ex Tax:$79.99
Model: 10037
ENJOMOR α-type Single Cylinder Hot-air Stirling Engine External Combustion Engine Model Science ToyFeatures:Unique and Unusual Styling: This Stirling engine employs an alpha construction, which is tiny, graceful, and spacious, with a high output power and an intriguing operating form that combines t..
$94.99 $94.99
Ex Tax:$94.99
Model: 10137
ENJOMOR γ-shape Metal Hot-air Stirling Engine Powered Engine Mini Helicopter Model Building KitFeatures:Stirling aircraft: This stunning aircraft is propelled by a Stirling engine in the shape of a. Although it won't fly, the propeller will start to spin when the alcohol lamp is lit.Excellent M..
$169.99 $169.99
Ex Tax:$169.99
Model: 10189
ENJOMOR γ-Type Hot-air Single Cylinder Stirling Engine Generator Model ToyFeatures:Science education toys include a novel design with a straightforward structure that is ready to use. The Stirling engine is an external combustion engine that runs steadily and quickly when the alcohol lamp is used to..
$45.99 $45.99
Ex Tax:$45.99
Model: 10283
Flame Flicker Stirling Engine Kit V1-45 Engine Model Educational Collection GiftThis engine is customized. It takes 25 days to produce it after the order is placed. Thanks again for your understanding.Features:. The new and brand new design of 2017 is a v1 single-cylinder 45-degree structure USES 30..
$279.99 $279.99
Ex Tax:$279.99
Model: 10042
Four-cylinder Retro Quadrilette Car Stirling Engine Model DIY AssemblyFeatures:.Origins:The Peugeot 161, a small, inexpensive economy car known as the Quadrilette when unveiled at the 1920 Brussels Motor Show, inspired this Stirling engine's design. A cardan propels the back wheels of this four-cyli..
$759.99 $759.99
Ex Tax:$759.99
Model: 10275
Gamma Free Piston Stirling Engine with LED Lights Physics DemosFeatures:.Creative Design: The Stirling engine is an incredible example of an external combustion engine that operates steadily and quickly by heating an alcohol lamp for one minute and turning a flywheel. It also makes a fun and inventi..
$43.99 $43.99
Ex Tax:$43.99
Model: 10212
Golden Hot Air Stirling Engine Powered 4-Wheel Car Engine Model Physical ToyFeatures:Unique Car Shape: The model car has a Stirling engine that turns it into a play automobile that can run.Science-related toys: The automobile is propelled by a Stirling engine. Playing with the car's forward and turn..
$39.99 $39.99
Ex Tax:$39.99
golden metal low temperature powered stirling engine model golden metal low temperature powered stirling engine model
New -0 %
Model: 10094
Golden Metal Low-Temperature Powered Stirling Engine ModelFeatures:.Novel Design: Golden appearance, exquisite and lovely, simple to use, extremely current technology, dual texture and beauty combination, perfect for teaching and decorating..Superior Quality: Each component is made from premium mate..
$26.99 $26.99
Ex Tax:$26.99
Model: 10269
Golden Single Cylinder Stirling Engine Model Science Physical Educational Toys GiftFeatures:.Exquisite Decoration Model: The Stirling engine's main structure design is straightforward and clever; its shape is original and distinctive, its golden look, its delightful running effect, its metal sense, ..
$33.99 $33.99
Ex Tax:$33.99
hit & miss gas engine combustion engine oil modified version project  engine model stem toys hit & miss gas engine combustion engine oil modified version project  engine model stem toys
New -0 %
Model: 10288
Hit & Miss Gas Engine Combustion Engine Oil Modified Version Project Engine Model STEM ToysDescription:Item Name: Hit & Miss Gas EngineColor: SilverMaterial: Aluminium AlloyRPM: 2000~6000Weight: About 2kgSize Of Engine: 22*12*15cm(L*W*H)Flywheel Diameter: 7cmVoltage: 3.6VFuel: Kerosene or Ga..
$269.99 $269.99
Ex Tax:$269.99
Model: 10296
Hot Air 2 Cylinders Stirling Engine Model with Voltage Digital Display Meter Led Bulb Sterling GeneratorFeatures:.Creative Exquisite Model: Two heating cylinders and two power cylinders are placed side by side, and the silver appearance is very delicate. It is full of metal and technological sense a..
$79.99 $79.99
Ex Tax:$79.99
Showing 49 to 60 of 149 (13 Pages)